12418 N.E. 124th St.
Kirkland, Washington, 98034, US
Crosshole Sonic Logging (CSL) is a method to verify the structural integrity of drilled shafts and other concrete piles. CSL normally requires steel (preferred) or PVC access tubes installed in the drilled shaft and tied to the rebar cage. Before the rebar cage is placed in the hole, the CSL access tubes are attached to the interior of the rebar cage. The cage is then lowered into the hole and the concrete is placed. Steel CSL tubes are preferred over PVC tubes because studies have shown that PVC tubes tend to debond from the concrete due to the heat of hydration process of concrete, resulting in erratic CSL test results. The tubes are filled with water as an intermediate medium. After curing for 3-7 days, a sound source and receiver are lowered, maintaining a consistent elevation between source and sensor. A signal generator generates a sonic pulse from the emitter which is recorded by the sensor. Relative energy, waveform and differential time are recorded, and logged. This procedure is repeated at regular intervals throughout the pile and then mapped. By comparing the graphs from the various combinations of access tubes, a qualitative idea of the structural soundness of the concrete throughout the pile can be gleaned. Typical product used is 1-1/2" BTC schedule 40 ASTM A53A x 21' , RJB Wholesale always has in stock.
| || |